how to apply a magnetic nasal dilator

🧼 step 1: clean your nose

🟢 wash your nose with mild soap and water to remove oil and dirt.
🟢 dry your skin completely so the magnets stick properly.

🧲 step 2: place the magnets

🔹 take the two small adhesive magnetic pads and position them on the outer sides of your nose, above your nostrils.
🔹 make sure they stick securely and feel comfortable—this will serve as the base for the breathing strip.

🔗 step 3: attach the rubber breathing strip

🔸 hold the rubber breathing strip with both hands.
🔸 carefully stretch it over the bridge of your nose.
🔸 connect each end to the magnets so it gently pulls your nostrils outward.

✔️ you should feel a lift that helps open your nasal passages.

⚙️ step 4: adjust for comfort

✅ make sure the strip is snug but not too tight.
✅ breathe in through your nose to check airflow.
✅ if needed, reposition the strip slightly for better comfort.

🌙 step 5: wear as needed

🛌 use the nasal dilator while sleeping for improved breathing.
🏃‍♂️ wear it during exercise or activities where better airflow helps.

🧴 step 6: remove and clean

🟡 gently detach the rubber breathing strip from the magnets.
🟡 remove the magnets from your nose.
🟡 wash both the strip and magnets with warm water and mild soap.
🟡 let them air dry completely before storing.

📌 tips for best results:

✅ make sure your skin is clean before applying.
✅ store the dilator in a dry, clean place when not in use.
✅ replace the breathing strip if it starts to lose elasticity.